Unilock Brussels Block Concrete Paver

SKU: 2_5_300051
$71.58 to $93.04
(0)No Reviews yet

Unilock Brussels Block Concrete Paver:

Brussels Block is the original tumbled paver, first introduced to North America by Unilock in 1993. These pavers are literally ‘tumbled’ in a drum to create an antiqued patina that brings timeless warmth and a relaxed appearance to any project.

Reflecting the design cues of quarried stone, Unilock's Brussels Block was traditionally sold in the standard and half stone sizes, until the XL size was introduced to increase the range of patterning possibilities. Today, Unilock's Brussels Block is available in a number of colours and continues to be a popular choice for rustic driveway, patio and walkway projects.

Available Colours:
Unilock Brussels Block Concrete Paver is available in the following colours:

Unilock Brussels Block Concrete Paver is ideal for the following applications:

Shape, Sizes and Formats:
Unilock Brussels Block Concrete Paver comes in the following sizes and formats:

sizeinchesmmqty per bundleqty per layer
Half4 x 6 7/8 x 2 3/4104 x 173 x 7050463

Coverage by bundle:
99.79 ft2

Coverage by layer:
12.47 ft2

Coverage by Unit:
0.20 ft2

3,124 lbs per bundle
390.50 lbs per layer
6.20 lbs per unit

sizeinchesmmqty per bundleqty per layer
Standard6 7/8 x 8 1/4 x 2 3/4173 x 208 x 7024030

Coverage by bundle:
95.94 ft2

Coverage by layer:
11.99 ft2

Coverage by Unit:
0.40 ft2

95.94 lbs per bundle
11.99 lbs per layer
0.40 lbs per unit

sizeinchesmmqty per bundleqty per layer
XL8 1/4 x 13 3/4 x 2 3/4208 x 348 x 7012015

Coverage by bundle:
95.94 ft2

Coverage by layer:
11.99 ft2

Coverage by Unit:
0.80 ft2

3,024 lbs per bundle
378 lbs per layer
25.20 lbs per unit

Contact Van Beek’s Landscape Supply today to discover why we are recognized as the Greater Toronto Area’s (GTA) leading supplier of Unilock Brussels Block Concrete Paver.

Unilock Brussels Block Concrete Pave - Additional Information:

RECOMMENDED BASE STABILIZATION – one layer of DriveGrid™" stabilization grid between subgrade and base material. Recommended depth 8” to 10” below pavers for maximum stability and performance. Use under Standard Base or Permeable Base.

STANDARD BASE – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

STANDARD BEDDING COURSE – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

ALTERNATIVE PERMEABLE BASE – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

ALTERNATIVE PERMEABLE BEDDING COURSE – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8) screeded over base.

SPECIAL NOTE: CONCRETE DIRECT OVERLAY – In some areas of the country and in some applications pavers are very successfully placed directly over concrete. Concrete as a base is in itself quite strong, but it can affect the structural integrity of the paver particularly in vehicular applications, where the concrete below is sub-par. The following considerations must be taken into account to insure that the concrete below the surface is ideal:
  1. Concrete integrity – concrete must be in good condition, and not crumbling
  2. Drainage slope – concrete below must be sloped away from all buildings and structures
  3. Drainage holes – In lowest areas of the concrete, drill 1” holes in concrete (on 12” centers) and fill holes with ¼” chip (ASTM No. 8)
  4. Base drainage - the area below the concrete must not be subject to frost movement
  5. Surface - surface must be totally smooth and flat equivalent to the desired finished surface
  6. Waterproofing - may be required when installing pavers over concrete where there is a basement or cold cellar below. Install an impervious rubber membrane over the surface prior to installing any pavers over the surface.
  7. Jointing Sand - Use an impervious polymeric sand when installing over concrete

JOINTING MATERIAL AND JOINT STABILIZATION - All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance,, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand)

Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. Always follow manufacturer’s application specifications and requirements.

HANDLING – This product has no special handling requirements.

EDGE RESTRAINT - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

PAVER COMPACTION - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction.

CLEANERS – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.

  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Select type for desired aesthetics
  • The product must be cleaned before sealing
  • Always read and follow the manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected

Sq Ft per Bundle95.9495.9499.79
Sq Ft per Layer11.9911.9912.47
SqFt Per Section31.9815.9914.26
Layers per Bundle888
Per Bundle Section367
Lin Ft per Sq.Ft. - Soldier0.851.421.72
Soldier LnFt Per Section27.322.724.57
Lin Ft per Bundle - Soldier81.9136.22172
Lin Ft per Sq.Ft. - Sailor1.431.712.95
Sailor LnFt Per Section45.6727.342.04
Lin Ft per Bundle - Sailor137163.78294.3
Units per Sq Ft1.252.55.05
Units Per Section404072
Units per Bundle120240504
Units per Layer153063
Lbs per Layer378383390.5
Lbs Per Section1,008.00510.67446.29
Lbs per Bundle3,024.003,064.003,124.00
Lbs per Unit25.212.776.2
Lin Ft per Layer - Soldier10.2417.0321.5
Lin Ft per Unit - Soldier0.680.570.34
Lin Ft per Layer - Sailor17.1320.4736.79
Sq Ft per Unit0.80.40.2
All products are in stock and available for purchase in-store and online unless noted as "Out-of-Stock" or "Special Order Item" (see details below)
Special Order Item: This product can be ordered in-store and online. This product cannot be returned. Pickup and delivery times vary for this product.
Out-of-Stock: This product is currently out of stock and unavailable to purchase.
Please note that in the event of supplier, shipping-related logistic, weather, and/or warehousing issue,the availability of your selected products for your chosen pickup or delivery date might be affected. Should any issues arise with your order, a Van Beeks’ staff member will contact you during business hours to discuss solutions. For any questions or additional information, don't hesitate to contact Van Beek's at (905) 842-5053, Oakville location or our (905) 257-4580, Mississauga location.

All concrete and natural stone products are sold in one of the following ways. Reference the product description to find which purchase unit applies to that product. For more information on the sale and delivery of our products, see our Frequently Asked Questions or contact our store at (905) 842-5053.

Sold by Bundle

When an item is sold by bundle, you are buying the entire skid.

Sold by Layer

When an item is sold by layer, you are buying a single layer of the product on the skid.

Sold by Unit

When an item is sold by unit, you are buying a single piece of the product.

Ratings & Reviews

No reviews available

Be the first to Write a Review