Techniseal NOCO Polymeric Joint Sand
Techniseal NOCO Polymeric Joint Sand - Details
Van Beek's is pleased to introduce Techniseal NOCO Polymeric Joint Sand. NOCO's unique "No Compaction" formula is an innovative solution designed to simplify the installation of flagstones and other paving materials where mechanical compaction isn't feasible or traditionally used.
The high compressive strength of NOCO allows it to spread easily and flow smoothly, filling joints uniformly without the need for vibrating plates or any other mechanical compaction, saving time, effort, and money and preventing potential paving material damage.
NOCO's durability is unmatched, remaining flexible to accommodate soil movements and prevent joint crumbling during freeze/thaw cycles. It firmly adheres to the inner walls of pavers and stones, resisting contraction and ensuring long-lasting stability.
Features:
- Fast wetting
- Deters ants and other insects
- Inhibits weed growth
- Eliminates joint erosion – water, frost heaving, wind, cleaning, etc.
Applications:
- Natural stones, wet cast pavers, concrete pavers, highly textured surfaces, large slabs and porcelain tiles
- Perfect for joints ranging from 1/4" to 4" wide (0.64 cm to 10 cm).
- Residential and commercial projects
- For vehicular traffic
Contact Van Beek’s Landscape Supply today to discover why we are recognized as the Greater Toronto Area’s (GTA) leading supplier of Techniseal NOCO Polymeric Joint Sand.
Techniseal NOCO Polymeric Joint Sand - Additional Information
Installation Conditions:
- Temperature must be above 10°C (50°F) for 48 hours following installation.
- The surface and joints must be dry.
- Sprinkler systems must be turned off.
Tools Required:
- Street broom with semi-rigid bristles
- Leaf Blower
- Garden Hose
- Small soft brush for smoothing down the joints before activation
Application Instructions:
- Spread the product evenly on a small surface.
- Using the street broom, fill joints. Sweep NOCO™ over short distances.
- Remove excess NOCO™ from the surface with the broom.
- Level the joint height of NOCO™ and remove all NOCO™ residue from the surface with the leaf blower.
- Using the small brush, smooth down the NOCO™ joint to ensure a uniform finish after activation.
- For joints up to 13 mm (1/2" ): wet 30 sec/9,2 m2 (100 sq. ft.). For joints 13-100 mm (1/2" to 4" ): wet up to 60 sec/4,5 m2 (50 sq. ft.). Stop showering when you see water retention on the joints.
- Use the leaf blower to remove all excess water from the surface.
